Search

Acura SLX Recalls

Create a Recall Alert

1998 Acura SLX Recall

Item Affected: POWER TRAIN: TRANSFER CASE (4-WHEEL DRIVE)
Date Announced: 08/03/1998
Description of Recall:
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE TRANSFER GEARBOX FLANGE NUTS WERE NOT PROPERLY INSTALLED, CAUSING THE NUTS TO LOOSEN.
Action Need To Fix It:
DEALERS WILL INSPECT FRONT AND REAR FLANGE NUTS AND, IF FOUND LOOSE, TIGHTEN TO SPECIFIED TORQUE AND SECURED STAKED AT TWO PLACES.

1997 Acura SLX Recall

Item Affected: SUSPENSION
Date Announced: 03/11/1997
Description of Recall:
THESE VEHICLES WERE MANUFACTURED WITHOUT A LOCK WASHER AND/OR SCREWS IN THE FRONT HUB.
Action Need To Fix It:
DEALERS WILL INSPECT THE FRONT HUBS TO DETERMINE IF THE LOCK WASHER AND SCREWS WERE PROPERLY INSTALLED. IF NOT, THEY WILL MAKE THE NECESSARY REPAIRS.

1997 Acura SLX Recall

Item Affected: SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: HOSES, LINES / PIPING, AND FITTINGS
Date Announced: 06/03/1997
Description of Recall:
THE LEFT FRONT BRAKE LINES WERE INSTALLED IMPROPERLY AT THE ASSEMBLY LINE RESULTING IN INSUFFICIENT CLEARANCE BETWEEN THE BRAKE LINE AND AN UPPER CONTROL ARM OF THE SUSPENSION.
Action Need To Fix It:
DEALERS WILL INSPECT THE CLEARANCE BETWEEN THE BRAKE LINE AND THE UPPER CONTROL ARM. IF THE CLEARANCE IS NOT ACCORDING TO SPECIFICATIONS, THE BRAKE LINE WILL BE REPLACED.

1996 Acura SLX Recall

Item Affected: SEAT BELTS: REAR
Date Announced: 12/12/1996
Description of Recall:
CERTAIN VEHICLES WERE MANUFACTURED WITH AN INCORRECT REAR CENTER SEAT BELT ASSEMBLY BUCKLE. THE MISBUILD INVOLVED FITTING A BUCKLE FOR ANOTHER MARKET WITH THE CORRECT U.S. SPECIFICATION SEAT BELT.
Action Need To Fix It:
DEALERS WILL INSPECT THE REAR CENTER SEAT BELT TONGUE AND BUCKLE AND INCORRECT BUCKLE ASSEMBLIES WILL BE REPLACED.

1996 Acura SLX Recall

Item Affected: SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: HOSES, LINES / PIPING, AND FITTINGS
Date Announced: 06/03/1997
Description of Recall:
THE LEFT FRONT BRAKE LINES WERE INSTALLED IMPROPERLY AT THE ASSEMBLY LINE RESULTING IN INSUFFICIENT CLEARANCE BETWEEN THE BRAKE LINE AND AN UPPER CONTROL ARM OF THE SUSPENSION.
Action Need To Fix It:
DEALERS WILL INSPECT THE CLEARANCE BETWEEN THE BRAKE LINE AND THE UPPER CONTROL ARM. IF THE CLEARANCE IS NOT ACCORDING TO SPECIFICATIONS, THE BRAKE LINE WILL BE REPLACED.